Search for: All records

A metal-free strategy to access tertiary difluoromethylene-containing molecules from RCF₂H (R = aryl, H, F) precursors, vinyl-pinacol boronic ester (BPin) reagents, and proradical reagents is reported. 

The cycle time of a standard liquid chromatography (LC) system is the sum of the time for the chromatographic run and the autosampler injection sequence. Although LC separation times in the 1-10 s range have been demonstrated, injection sequences are commonly >15 s, limiting throughput possible with LC separations. Further, such separations are performed on relatively large bore columns requiring flow rates of ≥5 mL/min, thus generating large volumes of mobile phase waste when used for large scale screening and increasing the difficulty in interfacing to mass spectrometry. Here, a droplet injector system was established that replaces the autosampler with a four-port, two-position valve equipped with a 20 nL internal loop interfaced to a syringe pump and a three-axis positioner to withdraw sample droplets from a well plate. In the system, sample and immiscible fluid are pulled alternately from a well plate into a capillary and then through the injection valve. The valve is actuated when sample fills the loop to allow sequential injection of samples at high throughput. Capillary LC columns with 300 μm inner diameter were used to reduce the consumption of mobile phase and sample. The system achieved 96 separations of 20 nL droplet samples containing 3 components in as little as 8.1 min with 5-s cycle time. This system was coupled to a mass spectrometer through an electrospray ionization source for high-throughput chemical reaction screening. 

Site-specific functionalization of unprotected native peptides and biomolecules remains a useful transformation in synthetic design and chemical biology, yet until recently, advancements in transition metal-catalyzed methods, which have prevailed in organic synthesis, have been relatively ineffective when applied to large and structurally complex biomolecules. Here, the mechanistically distinct, Ni/photoredox-catalyzed arylation of unprotected, native thiols ( e.g. , cysteine residues) is reported – a process initiated through a visible light-promoted, hydrogen atom transfer (HAT) event under ambient conditions. Sub-stoichiometric loadings of the dual-catalyst system (≤5 mol%) are employed, granting excellent site-specificity, broad substrate scope, and low chemical waste. Reaction scalability (from μg to grams) has been achieved through modest reagent adjustments, and high throughput experimentation (HTE) demonstrates the ease of reaction setup, enabling prompt screening of aryl halide coupling partners and conditions. Scores of thiol substrates and aryl entities were examined and effectively conjugated, suggesting further diverse, practical applications.